BECKHOFF BK3000 - Manual (Page 47)

Appendix
BK3xxx/LC3100 47
The DP configuration data for the various terminals looks like this:
Terminal DP configuration data
KL3xx2, KL3351 1 channel 16 bits in (compact):
0x50 (must be used twice for each terminal)
1 channel 24 bits in/out (complete):
0xB2 (must be used twice for each terminal)
1 channel 24 bits in / 8 bits out (user data, status and control):
0xC0,0x00,0x82 (must be used twice for each terminal)
1 channel 24 bits in (user data, status):
0x40,0x82 (must be used twice for each terminal)
1 channel 16 bits in / 8 bits out (user data, control):
0xC0,0x00,0x81 (must be used twice for each terminal)
2 channels 16 bits in (compact):
0x51 (must only be used once for each terminal)
2 channels 24 bits in/out (complete):
0xB5 (must only be used once for each terminal)
KL3xx4 1 channel 16 bits in (compact):
0x50 (must be used four times for each terminal)
1 channel 24 bits in/out (complete):
0xB2 (must be used four times for each terminal)
1 channel 24 bits in / 8 bits out (user data, status and control):
0xC0,0x00,0x82 (must be used four times for each terminal)
1 channel 24 bits in (user data, status):
0x40,0x82 (must be used four times for each terminal)
1 channel 16 bits in / 8 bits out (user data, control):
0xC0,0x00,0x81 (must be used four times for each terminal)
4 channels 16 bits in (compact):
0x53 (must only be used once for each terminal)
4 channels 24 bits in/out (complete):
0xBB (must only be used once for each terminal)
KL4xx2 1 channel 16 bits out (compact):
0x60 (must be used twice for each terminal)
1 channel 24 bits in/out (complete):
0xB2 (must be used twice for each terminal)
1 channel 24 bits in / 8 bits out (user data, status and control):
0xC0,0x82,0x00 (must be used twice for each terminal)
1 channel 16 bits out / 8 bits in (user data, status):
0xC0,0x81,0x00 (must be used twice for each terminal)
1 channel 24 bits out (user data, control):
0x80,0x82 (must be used twice for each terminal)
2 channels 16 bits out (compact):
0x61 (must only be used once for each terminal)
2 channels 24 bits in/out (complete):
0xB5 (must only be used once for each terminal)
KL4xx4 1 channel 16 bits out (compact):
0x60 (must be used four times for each terminal)
1 channel 24 bits in/out (complete):
0xB2 (must be used four times for each terminal)
1 channel 24 bits in / 8 bits out (user data, status and control):
0xC0,0x82,0x00 (must be used four times for each terminal)
1 channel 16 bits out / 8 bits in (user data, status):
0xC0,0x81,0x00 (must be used four times for each terminal)
1 channel 24 bits out (user data, control):
0x80,0x82 (must be used four times for each terminal)
2 channels 16 bits out (compact):
0x63 (must only be used once for each terminal)
2 channels 24 bits in/out (complete):
0xBB (must only be used once for each terminal)