Beisler 1281-5 - Manual (Page 27)

Key 8 Input- Output test
Key 9 Set global parameters
Key 0 Creation of programs / Creation of sequences
Calling up sewing programs
–
Switch the main switch on.
The control initializes.
The seam program previously used is loaded.
– Press one of the keys “1, 2, 3, 4, 5, 6, 7, 8, 9, 0”.
The selected seam program is loaded.
Calling up the parameter menu
–
Switch the main switch on.
The control initializes.
The previously used program appears in the display.
– Press key “P”.
The selection menu is called up.
– Press one of the keys “1, 2, 3, 4, 5, 6, 7, 8, 9, 0”.
The display changes over to the corresponding function.
Mouse back
When the seam program is selected:
–
Press key “F1”.
The mouse returns to its basic position.
Manual stacking
When the seam program is selected:
–
Press key “F2”.
The stacker makes a stacking movement.
23
1