Beisler 1281-5 - Manual (Page 70)

Adjustment in sewing direction
Standard checking
When the right hook crosses the left hook, the distance “A” should
amount to 0.5 mm and the distance “B” to 0.2 mm.
Correction
–
Turn handwheel in direction of rotation until the right hook crosses
the left hook.
– Turn and shift the right hook in such a way that the distance “A”
amounts to 0.5 mm and the distance “B” to 0.2 mm.
– Tighten screw 4 in this position.
– Check all adjustments once again and readjust, if necessary.
– Remount thread guides 1 and 3 as well as cover 2.
– Adjust thread guides according to chapter “thread regulation of the
overlock hooks”.
Note
The right overlock hook is dependent on the needle size.
Use hook No. 28 for needles Nm 60 - 80 and hook No. 22 for needles
Nm 80 - 100.
8
4