Beisler 1281-5 - Manual (Page 30)

6.4 Adjusting the control
The parameter values are altered in the individual parameter menus.
–
Press key “P”.
– Select the menu item.
– Select the parameter to be altered with the keys “F1” or “F2”.
– Press key “E”.
– Alter the parameter value with the keys “Plus” or “Minus”.
– Press key “P”.
The new parameter value is stored.
– Press key “P”.
You return to the selection menu.
– Press key “P”.
You return to the sewing program.
Fullness distribution with needle and bottom feed
According to the equipment of the sewing station the parameters for
the needle and bottom feed are occupied differently.
The sketches below show the individual lines.
With cylinder
Line 1 Line 2 Line 3 Basic seam
Stitches Stitches Stitches
With step motor
Line 1 Line 2 Line 3 Basic seam
Stitches Stitches Stitches
26