Beisler 1281-5 - Manual (Page 43)

8. USB stick
8.1 General notes
The USB stick 1 serves for storing and transferring of the sewing unit
software.
By means of the USB stick program and parameter data can also be
transferred to other sewing units.
Commercially available USB 1 sticks can be used, too.
8.2 Formatting the USB stick
Before using a new USB stick this has to be formatted correspondingly.
The file format is the “FAT 16” system.
–
Format the USB stick with the FAT 16 system via a PC.
8.3 Plugging the USB stick in the control
– Switch the main switch off.
– Plug the USB stick 1 in the lower slot of the Efka control.
– Press key “P” and keep it pressed.
– Switch the main switch on.
The message appears for a moment.
USB. DEV. DETECT:
– Keep key “P” pressed until the following message appears in the
display:
SERVICE - CODE
– Enter CODE 3112.
– Press key “E”.
39
1
1