Beisler 1281-5 - Manual (Page 84)

4. Oil lubrication
Caution: Risk of injury !
Oil can cause skin eruption.
Avoid a longer contact with the skin.
Wash yourself thoroughly after a contact.
ATTENTION !
The handling and disposal of mineral oils is subject to legal
regulations.
Deliver used oil to an authorized collecting station.
Conserve your environment.
Be careful not to spill any oil.
4.1 Oil change and oil filter change
4 weeks after the initial start-up and subsequently every two years an
oil change has to be carried out with the machine head disassembled.
The oil filter should be cleaned or exchanged every two years.
Note
If the oil pressure gauge 5 does not move downwards when the
machine head is running or if the oil is dirty, the oil filter has to be
cleaned or exchanged.
–
Unscrew the drain screw 1 and collect the used oil in a collecting
basin.
– Screw drain screw 1 in again.
– Unscrew screws 6 of the cover.
– Screw one of the screws 6 in filter 8 and unscrew the filter.
– Clean or exchange filter 8.
– Insert a new gasket 7, put the cover on again and tighten.
– Unscrew screw 2 and fill in oil until the point of the oil level
indicator 3 has reached the upper marking of the oil inspection
glass 4.
We recommend to use oil with a density of 0.865 g/cm³ at 15 ° C.
– Insert screw 2 again.
22
1
2
3 4
6
8
7
3
5