Comtech EF Data RSU-503 - Manual (Page 60)

RSU-503 Redundancy Switch Unit RSU-503L Option
Rev. 8 A–7
Table A-2. Waveguide Switch Cable Dimensions
Dimension “A” Dimension “B”
12 ft. 10 ft.
17 ft. 15 ft.
22 ft. 20 ft.
A.5 Addressing
The following are the factory default addresses:
•
RSU-503 is set to address 1
•
RFT A is set to address 2
•
RFT B is set to address 3
The proper M&C cable hook-up is critical:
•
RFT A must be connected to the RSU Port A
•
RFT B must be connected to the RSU Port B
Note: If these connections are reversed, no communications will take place.