Datatek UMI User Manual

Page 39

Advertising

U N I V E R S A L M E D I A T I O N I N T E R F A C E ( U M I ) U S E R M A N U A L

04/30/09

For users who wish the console to automatically log off after a period of inactivity, there is a
console timer. The console timer defaults to the disabled condition, and may be activated by the

timeout

command.

This command is only visible when the console is logged in. The

<number of minutes> value

must be between 1 and 255, inclusive.

When the UMI determines a period of inactivity of the specified time, it automatically forces the
console to log off. An

INFO-level alarm (see Appendix C) is issued at that time.

5.22 VIRTUAL PORT ADMINISTRATION

The

vport

command configures one or more virtual ports. The value of

<vport #> is in the range

of 1 through 504, inclusive, and represents the first virtual port to be affected by this command.

The

cnt parameter allows more than one port to be affected. All virtual ports may be configured

with a single command having a

cnt of 504.

The

incr parameter allows for multiple dport configurations from a single command. It is an

increment added to the TCP port base value for each subsequent port specified in the

cnt option.

Examples using the inrc command together with the cnt command.

The first example configures two vports (starting at vport 1) and increments the dport by a value
of one. The second example configures three vports (starting at vport 1) and increments each
subsequent dport by a value of 200.

Note: The "incr" option is used to configure the "dport" option only.

Example 1

<UMI> vport 1

cnt=2

incr=1

dest=192.168.59.251 dport=20000

<UMI> vfy vport 1
Virtual Ports 1 - 1 :

Advertising