Flowserve M-series PolyChem - Manual (Page 3)

USER INSTRUCTIONS PolyChem M-SERIES ENGLISH 71569218 07-11
flowserve.com
Page 3 of 60
®
INDEX
Page Page
Additional sources of information (10.3) 58
Assembly of pump (6.9) 47
CE marking and approvals (1.2) 4
Change notes (10.2) 58
Configurations (3.1) 12
Consignment receipt and unpacking (2.1) 10
Copyright (1.4) 4
Design of major parts (3.3) 12
Direction of rotation (5.3) 28
Disclaimer (1.3) 4
Drawing Group A and 1 Close Coupled (8.1) 55
Drawing Group A and 1 Long Coupled (8.2) 55
Drawing Group B and 2 Close Coupled (8.3) 56
Drawing Group B and 2 Long Coupled (8.4) 56
Duty conditions (1.5) 4
Electrical connections (4.7) 25
Examination of parts (6.8) 44
Fastener torques (6.5) 35
Final shaft alignment check (4.8) 25
Foundation (4.3) 15
General (1.1) 4
Grouting (4.4) 17
Guarding (5.4) 28
Handling (2.2) 10
Hydraulic, mechanical and electrical duty (5.9) 31
Impeller (6.6)
35
Initial alignment (4.5) 18
Lifting (2.3) 10
Location (4.1) 15
Maintenance schedule (6.1) 32
Nameplate and safety labels (1.7) 8
Noise level (1.8) 9
Nomenclature (3.2) 12
Part assemblies (4.2) 15
Parts List Group A and 1 (8.5) 57
Parts List Group B and 2 (8.6) 57
Performance and operation limits (3.4) 13
Piping (4.6) 18
Pre-commissioning procedure (5.1) 26
Priming and auxiliary supplies (5.5) 29
Protection systems (4.9) 25
Pump lubricants (5.2) 26
Pump removal and disassembly (6.7) 37
Recommended spares and consumable items (6.3)
33
Recycling and end of product life (2.5) 11
Running or operation (5.7) 30
Safety (1.6) 5
Spare parts (6.2) 33
Starting the pump (5.6) 29
Stopping and shutdown (5.8) 31
Storage (2.4) 11
Supplementary user instructions (10.1) 58
Tools required (6.4) 33