Fluke Biomedical IDA-5 - Manual (Page 11)

1
Introduction
The Fluke Biomedical IDA-5 Infusion Device Analyzer (the Product) is a precision
instrument that examines the performance of medical infusion devices. The
Product measures the flow rate and volume supplied, and the pressure
generated in occlusion or blockages of the fluid line. A maximum of 4 infusion
devices can be independently examined with the four-channel version of the
Product.
Intended Use
The Product is to be used by infusion device manufacturers, hospital biomedical
engineering departments, and third-party service organizations. Use the Product
to verify accurate performance of infusion devices through measurement of flow,
volume, and pressure. The performance of a wide range of infusion devices can
be analyzed including syringe, drop counting, peristaltic, and volumetric types.
Non-steady flow rate pumps can also be analyzed. The Product uses distilled or
deionized water with an optional wetting agent only.
Unpack the Product
Carefully unpack all items from the box and check that these items are included:
• The Product
• Power Cord
• Accessory Set (syringe, stopcocks, drain tubing, and Micro 90

)
• CD (contains Users Manual and HydroGraph software)
• USB Cable