Fluke Biomedical 37-705 - Manual (Page 25)

Operation
Calibrate Modes
2
2-15
Delete a Group
Calibrate Screen # 8
MEASURE ADD
group
name
SELECT EDIT
SETUP DELETE
CAL EXPOSE
REPORT
MODE OPTION GROUP
The DELETE option allows the operator to delete an existing group. To delete a group from the group
database select the GROUP soft-key and press the scroll up or scroll down key to review the groups.
Once the appropriate group has been selected press the ENTER key.
Calibrate Screen # 9
MEASURE ADD
group
name
SELECT EDIT
SETUP DELETE
CAL EXPOSE
REPORT DELETE group
name
ARE YOU SURE?
MODE OPTION GROUP YES No
To delete the selected group, press the YES soft-key, to abort the delete process press the NO soft-key.
Making a Calibration Exposure – Calibrate Screen # 10
MEASURE ADD
group
name
SELECT EDIT
SETUP DELETE
CAL EXPOSE
REPORT
MODE OPTION GROUP
The EXPOSE option allows the operator to select an existing group and perform a calibration. Select the
GROUP soft-key, scroll to the desired group and press the ENTER key.