Fluke Biomedical 37-705 - Manual (Page 6)

Nuclear Associates 37-705
Operators Manual
1-2
• Can be used as a stand-alone system without the need for a PC
1.3 Specifications
Input Circuitry Five bi-polar electrometer channels w/digital zeroing and gain control
Rate Range 1.0 cGy/min to 9999 cGy/min **
Dose Range 0.1 cGy to 9999 cGy
Sensitivity Adjustment 1 nC/cGy nominal, calibration range: 0.1 nC/cGy to 10 nC/cGy
Display 240 x 64 dot Liquid Crystal Display (LCD) 8 line x 40 characters, with
CCF backlight
Clock Real Time Clock, battery operated, US or Euro format
Alarm User selectable alarm level for each channel
User Controls On-off switch
5 column select soft-keys for control functions
Scroll up, scroll down and enter key for data entry
User Setup Parameters Stored in non-volatile, battery-backup RAM
Computer Interface RS-232, 19.2 BAUD, 8, N, 1
Data format: standard-decimal points, or Euro-style commas
Printer Interface Parallel, selectable drivers for LaserJet III and later, with ASCII (text)
output compatible with most other printers, RS-232 Serial Port used for
Label printer
Report Types Treatment label Treatment report
Flatness/Symmetry report
Energy constancy report
Calibration report
Operating Temperature 50° to 86°F (10° to 30°C)
Relative humidity: 5 to 95% non-condensing
Weight 2.5 lbs. (1.2 kg)
Size 9 (w) x 8.5 (d) x 2.5 in (h) (22.9 x 21.6 x 6.4 cm)
EMI shielded
Power 120 VAC, 60 Hz or 230 VAC, 50 Hz to 12 VDC @ 1A AC adapter, UL,
CSA, CE
** The rate range is dependent upon diode sensitivity and beam characteristics. The maximum input
charge cannot exceed 7nC per 100mS for negative polarity diodes, or 2.5nC per 100mS for positive
polarity diodes.