Fluke Biomedical 37-705 - Manual (Page 8)

Nuclear Associates 37-705
Operators Manual
1-4
1.5 Receiving Inspection
Upon receipt of the unit:
1. Check the packaging and its contents for damage. If damage is evident, file a claim with the carrier
and contact Fluke Biomedical at 440.248.9300 for further instructions.
2. Remove the packaging and visually inspect the unit for damage.
3. Check that all items on the packing list have been received and are in good condition.
If items are missing or damaged, contact Fluke
Biomedical at 440.248.9300 for further instructions.
1.6 Storage
If the unit is to be stored prior to use, pack it in the original container, if possible, and store in an environ-
ment free of corrosive materials, fluctuations in temperature and humidity, and vibration and shock.
Prior to use, check the condition and functionality of the device. Also check that the calibration is still
valid. Periodic re-calibration is usually required by individual radiation safety and/or quality assurance
programs. Please consult your local radiation safety or quality assurance office if you have any questions.
1.7 Routine Cleaning
Do not immerse the Model 37-705 VeriDose V. The
unit is not waterproof. Liquid could damage the
internal circuitry. The unit should be kept clean and
free from dirt and contamination. The unit may be
cleaned by wiping with a damp cloth using any
commercially available cleaning or decontamination
agent.
NOTE
CAUTION