Hypertherm Duramax Hyamp Long Handheld Torches - Manual (Page 48)

48 Duramax Hyamp Long Handheld Torches Service Manual 808290
4 – Component Replacement
7. The torch body and extension tube fit snugly into the right side of the front shell. While holding the extension tube,
gently press the right side of the shell away from the extension tube and torch body to remove it.
8. Slide the cap-sensor switch off its mounting post.
Figure 8 – Remove cap-sensor switch from 45° (top) and 90° (bottom) front shell
45°
90°