Hypertherm Duramax Hyamp Long Handheld Torches - Manual (Page 78)

78 Duramax Hyamp Long Handheld Torches Service Manual 808290
4 – Component Replacement
8. Connect the cap-sensor switch to the torch lead by pushing the mating plug on the torch lead wires into the socket
near the trigger end of the extension tube.
Figure 39
9. Connect the start switch by pushing the mating plug into the socket.
Figure 40
10. Reinstall all of the torch components that you removed in step 2 on page 73. See Install the handle on page 43.
11. Connect the new torch lead to the power supply.
12. Reconnect the gas supply, and turn ON (I) the power.
Cap-sensor switch
Mating plug
Start switch
Mating plug