Hypertherm Duramax Hyamp Long Handheld Torches - Manual (Page 80)

80 Duramax Hyamp Long Handheld Torches Service Manual 808290
4 – Component Replacement
Install the quick disconnect housing
1. Place the new latch into the quick disconnect housing.
2. Hold up the end of the latch and insert the new spring under the latch.
3. Use a blade screwdriver to push the spring into the recess until it clicks into place.
4. Install the new shell halves onto the torch lead, making sure the strain relief fits in the slot of the shell and the wires
are not pinched or do not interfere with the latch.
5. Install and tighten the screws.