Hypertherm Duramax Hyamp Long Handheld Torches - Manual (Page 79)

Duramax Hyamp Long Handheld Torches Service Manual 808290 79
4 – Component Replacement
Replace the quick disconnect housing
Remove the quick disconnect housing
1. Turn OFF (O) the power, disconnect the gas supply, and disconnect the torch.
2. Remove the screws from the bottom half of the shell. (See Figure 41.)
3. Remove the 2 shell halves.
4. Remove the latch by using a blade screwdriver to press down firmly on the latch tab while pushing the tab down and
out toward the lead.
5. Pull the spring out of the quick disconnect housing.
Figure 41
Kit Description
428260 Kit: Duramax and Duramax Hyamp torch FastConnect replacement
1
2
3
4
5
6
7
8
9
10
1 Top shell half
2 Latch tab
3 Quick disconnect housing
4 Bottom shell half
5 Screws (4)
6 Strain relief slot
7 Torch lead
8 Strain relief
9 Spring
10 Latch