Marantz SR5004 - Manual (Page 16)

NAMES AND FUNCTIONS
14
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
BASIC
CONNECTIONS
ENGLISH
BASIC CONNECTIONS
CONNECTING HDMI COMPONENTS
HDMI JACKS
It can send digital video and audio signals from BDs and other sources directly to a display. It minimizes signal
degradation caused by analog conversion so that high quality images can be enjoyed.
This unit is also capable of converting analog video signals (Composite Video, S-Video, Component Video) for
HDMI output. Select an input source from the GUI menu system. (See page 25)
Users can change the allocations made to the unit's HDMI input terminals using the functions. For details,
refer to page 25.
Notes
• When the HDMI output is connected to a display monitor that does not support HDCP*, signals are not output.
To view images in HDMI, it is necessary to connect to a display that supports HDCP.
• There may be no image output if connected to a TV or display that is not compatible with the above format.
• Refer to the instruction manual of the TV or display to be connected to the unit for detailed information
regarding the HDMI terminal.
* HDCP: High-bandwidth Digital Content Protection system
SR6004
IN 1 IN 1( (BD BD) ) IN 4 IN 4( (DSS DSS) ) OUT 1 OUT 1 OUT 2 OUT 2
HDMI OUTPUT
HDMI INPUT
HDMI INPUT HDMI OUTPUT
Blu-ray disc player Video projector Satellite tuner TV
SR5004
IN 1 IN 1( (BD BD) ) IN 3 IN 3( (VCR VCR) ) OUT OUT
HDMI OUTPUT
HDMI INPUT
HDMI OUTPUT
Blu-ray disc player TV Satellite tuner
CONNECTING HDMI COMPONENTS
An HDMI cable (sold separately) is used to connect the HDMI jack on the unit with the HDMI jack on the Blu-
ray disc player, TV, projector or other component. To transmit multichannel audio via HDMI, the connected
player must support multichannel audio transmission through its HDMI jack.
Notes
• Some HDMI components can be controlled over the HDMI cable, but this unit cannot control other components
this way.
• Some source devices such as DVD players or set top box do not support HDMI repeater operations like those
of the unit. In such case, pictures are not properly projected on monitors such as TVs and projectors.
• When multiple components are connected to this unit, turn power to unused components off to prevent
interference between them.
• Disconnecting or connecting cables with the power on can damage the equipment. Turn the power off before
disconnecting or connecting cables.
• The unit has HDMI input and output terminals that support the following functions.
• Deep Color
• Dolby True HD
• DTS-HD Master Audio
• SACD
• DVD-Audio
• Multi channel PCM signals and audio signals of 64 kHz or higher that are input from the HDMI jack are not
output from the DIGITAL OUT jack.
• Depending on the quiality of the cable used, the HDMI signal may be affected by noise.
• The unit does not support HDMI control. However, it is possible to connect the unit between components that
do support HDMI control and exercise control by passing the HDMI control signals through the unit. (HDMI
control through function)
The HDMI OUT2 terminal of SR6004 does not support the HDMI control through function. When using the
HDMI control through function, use the HDMI OUT1 terminal. All the HDMI input terminals support the
HDMI control through function.
“HDMI control” is a function for exercising mutual control between components using CEC (Consumer
Electronics Control) as stipulated by the HDMI standard. By connecting components using HDMI cables,
linked operations can be performed between the components.