Search mode – Marantz SR5004 User Manual
Page 51
NAMES AND
FUNCTIONS
49
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
ADV
ANCED
OPERA
TION
ENGLISH
ADVANCED OPERATION
SEARCH MODE
You can search for the channel you want to listen to
using one of three search modes. You can also enter
the number directly to select the desired channel.
ALL CHANNEL SEARCH MODE
1.
2.
3.
2.
3.
1.
(Using the unit)
1.
Turn
the
INPUT SELECTOR knob to select
“TUNER”.
2.
Press
the
BAND button to select XM band.
3.
Press
the
3 or 4 cursor button on the front
panel to select the desired channel.
(Using the remote controller)
1.
To select tuner, press the TUNE button
twice within two seconds on the remote
controller.
2.
Press
the
BAND button to select XM band.
3.
Press and hold the
3 TUNE or 4 TUNE
button.
PRESET SEARCH MODE
1.
2.
3.
1.
2.
3.
(Using the unit)
1.
Turn
the
INPUT SELECTOR knob to select
“TUNER”.
2.
Press
the
BAND button to select XM band.
3.
Press
the
1 or 2 cursor button on the front
panel to select the desired preset channel.
(Using the remote controller)
1.
To select tuner, press the TUNE button
twice within two seconds on the remote
controller.
2.
Press
the
BAND button to select XM band.
3.
1 or 2 button to tune in the desired preset
channel.
Or enter the preset channel number with
the numeric buttons.
CATEGORY SEARCH MODE
You can select the desired channel from the category
allocated to each channel.
Category being aired can be only selected.
1.
1.
2.
4.
3.6.
5.
2.
4.
5.
3.
(Using the unit)
1.
Turn
the
INPUT SELECTOR knob to select
“TUNER”.
2.
Press
the
BAND button to select XM band.
3.
Press
the
ENTER button on the front panel.
4.
Press
the
1 or 2 button on the front panel to
select the desired category.
5.
After selecting the category, Press the
3
or
4 cursor button to select the desired
channel of the category.
6.
You can return to the normal mode by
press the ENTER button during Category
Search Mode.
(Using the remote controller)
1.
To select tuner, press the TUNE button
twice within two seconds on the remote
controller.
2.
Press
the
BAND button to select XM band.
3.
Press
the
CATEGORY + or – button.
4.
After selecting the category, Press the
3 or
4 button to select the desired channel of
the category.
5.
You can return to the normal mode by
press the ENTER button during Category
Search Mode.
Note
Category search automatically ends 10 seconds
after the last operation.