Marantz SR5004 - Manual (Page 20)

NAMES AND FUNCTIONS
18
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
BASIC
OPERA
TION
ENGLISH
BASIC OPERATION
REMOTE CONTROLLER OPERATION
To control the unit by your remote controller, you have to select the device AMP or TUNER by pressing the SOURCE button. Please refer below for the details in AMP or TUNER mode.
TUNER MODE AMP MODE
• Both RC007SR and RC008SR do not have the PRESET
code library for this device.
SR6004 SR5004 SR6004 SR5004 SOURCE ON/OFF Turns the SR5004/6004 on and off
POWER OFF
Turns the SR5004/6004 off
POWER ON Turns the SR5004/6004 on
HDMI
Switches between HDMI 1 and 2 outputs
(SR6004 only)
ZONE A/B Turns on or off ZONE A or ZONE B
Z.SPKR Turns on or off ZONE SPEAKER A
A/D Switches between the analog and digital inputs
ATT Reduces the input level
SPKR A/B Selects the speaker system
7.1 Selects the 7.1CH IN
SOURCE Selects a particular source component
AMP Selects AMP mode of remote unit
INPUT 3 / 4 Changes the input selector of SR5004/6004
DISPLAY Changes the front display mode
MUTE Decreases the sound temporarily
SURR Selects the surround mode
VOLUME +/– Adjusts the over all sound level
TOP Back to the TOP of “SETUP MENU”
INFO Displays the current setting on the monitor
CURSOR
Moves the cursor for setting in “SETUP
MENU” mode
ENTER
Confi rms the setting in “SETUP
MENU” mode
MENU Enters the “SETUP MENU”
EXIT Exits from “SETUP MENU”
MACRO(M)
(RC007SR only)
Selects the MACRO mode
HT-EQ
(RC008SR only)
Turns on or off HT-EQ mode
AUTO(1) Selects auto surround
STEREO(2) Selects STEREO mode
P.DIRECT(3) Selects the pure direct mode
SLEEP(4) Sets the sleep timer function
M-DAX(5) Selects the M-DAX mode
EQ(6) Selects the EQ mode
LIP SYNC(7) Selects the LIP SYNC mode
NIGHT(8) Turns on or off NIGHT mode
D.EQ/VOL(9)
Selects Audyssey Dynamic EQ TM and
Audyssey Dynamic Volume TM modes
T.TONE(CLR) Enters the test tone menu
CH SEL(0)
Calls up CH LEVEL ADJUST and adjusts
speaker levels or 7.1ch input level
V.OFF(+10) Turns on or off video output
TV POWER Turns the TV on and off
TV INPUT Selects the TV video input
TREBLE –/+
Adjusts the tone control of high
frequency sound
BASS –/+
Adjusts the tone control of low frequency
sound
ZONE A/B AMP function enabled
Z.SPKR AMP function enabled
A/D AMP function enabled
ATT AMP function enabled
SPKR A/B AMP function enabled
7.1 AMP function enabled
SOURCE AMP function enabled
AMP AMP function enabled
INPUT 3 / 4 AMP function enabled
DISPLAY AMP function enabled
MUTE AMP function enabled
SURR AMP function enabled
VOLUME +/– AMP function enabled
INFO Shows preset information
TUNE 3 / 4
Tunes a frequency station up and
down
PRESET + 2/– 1 Selects a preset station up and down
EXIT/MEMO
Enters the tuner preset memory
numbers
T.MODE
Selects the auto stereo mode or
mono mode
P.SCAN Starts preset scan
BAND Selects a radio band
T.DISP
Selects the display mode in XM Satellite
Radio and SIRIUS Satellite Radio
P.LOCK Select the parental lock mode
F.DIRECT Selects the “Frequency direct input”
0-9 Inputs the numeric
CLR Clears the inputting
TV POWER Turns the TV on and off
TV INPUT Selects the TV video input