Marantz SR5004 - Manual (Page 46)

NAMES AND FUNCTIONS
44
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
ADV
ANCED
OPERA
TION
ENGLISH
ADVANCED OPERATION
VIDEO CONVERT
ANALOG VIDEO CONVERSION
This unit is equipped to convert video signals for
monitor output. Because of this, indifferent of
the connection (VIDEO, S-VIDEO, COMPONENT
VIDEO) between the playback device and this unit,
listening and viewing are possible with a single
higher grade cable between the MONITOR OUT
terminal of the unit and the monitor.
UP-CONVERSION FROM ANALOG VIDEO
SIGNALS TO HDMI
The up-conversion feature of this unit can output
the input analog video signals (for component
video signals of 480i/576i, 480p/576p, 1080i and
720p resolution, and S-Video and Video (composite)
of 480i/576i resolution) to the HDMI MONITOR
terminal.
Notes
• HDMI video input is only output to the HDMI
MONITOR OUT terminal of the unit. If connecting
a playback device such as a DVD player to the
HDMI input jack, connect the HDMI MONITOR
OUT terminal of the unit to a TV monitor.
• This mode is unavailable for the REC out
terminal.
• This mode is unavailable for still picture, fast
forward and reverse play on video component.
• If, while attempting to use the video convert feature,
the unit cannot synchronize with the display device,
“NO SIGNAL” appears on the monitor or noise is
generated, this feature cannot be used. All of these
signs are caused by equipment incompatibility;
there is nothing wrong with the unit.
If this occurs, set “VIDEO CONVERT” in the
“VIDEO SETUP” menu to “DISABLE”. Next,
connect the video input signal to the display
component via the MONITOR OUT terminal under
VIDEO and the S-video input signal to the display
component via the MONITOR OUT terminal under
S-VIDEO.
• The video convert feature constantly monitors
input video signals and determines whether to
convert the input signals or not. However, some
input video signals cannot be detected correctly.
If this occurs, set “VIDEO CONVERT” in the
“VIDEO SETUP” menu to “DISABLE”.
CONNECTION EXAMPLE
• When a monitor is connected to the HDMI
MONITOR OUT terminal of the unit
VIDEO
or S-VIDEO
or component
HDMI or HDMI
Notes
• If the resolution of the component video signal
input from the playback device is other than
480i/576i, 480p/576p, 1080i or 720p, images
are not output from the HDMI MONITOR OUT
terminal of the unit.
• If the resolution of the Video signal input from the
playback device is other than 480i/576i, images
are not output from the HDMI MONITOR OUT
terminal of the unit.
• When a monitor is connected to the
VIDEO MONITOR OUT terminals of the
unit
VIDEO
or S-VIDEO
VIDEO
or component
HDMI
Notes
• The HDMI video signal input from the playback
device is not output from the VIDEO MONITOR
OUT terminals of the unit.
• If the resolution of the component video signal
input from the playback device is other than
480i/576i, it is not output from the VIDEO
MONITOR OUT terminals of the unit.
• When a monitor is connected to the
COMPONENT VIDEO MONITOR OUT
terminal of the unit
VIDEO
or S-VIDEO component
or component
HDMI
Note
• The HDMI video signal input from the playback
device is not output from the COMPONENT
VIDEO MONITOR OUT terminal of the unit.
Note of OSD menu system
• The setup menu can be displayed through all
video out terminals (“HDMI”, “COMPONENT”
and “VIDEO”).
I/P CONVERT
The video circuit of the unit is equipped with an I/P
conversion feature.
When this feature is on, 480i/576i analog video
signals (VIDEO, S-VIDEO or COMPONENT VIDEO)
input from a playback device can be converted
to 480p/576p and progressively output to the
COMPONENT VIDEO or HDMI MONITOR OUT
terminals of the unit.
(For setting instructions, see page 35)
Note
When a monitor is connected to the HDMI MONITOR
OUT terminal, and HDMI RESOLUTION is set to
720p, 1080i, 1080p, or AUTO, the I/P CONVERT
for COMPONENT VIDEO OUTPUT does not
function.
HDMI OUT (SR6004 ONLY)
HDMI OUTPUT 1 or 2 can be selected and used
with this unit.
Each time the HDMI button on the remote controller
is pressed, OUTPUT 1 is switched to OUTPUT 2 or
vice versa.
HDMI OUT 1 and HDMI OUT 2 cannot be output
simultaneously.
H D M I - O = O U T 1
HDMI RESOLUTION
This function is used to output the analog video
signal to HDMI as follows.
• 480i/576i signals can be converted to 480p/576p,
1080i, 720p or 1080p signals, while 480p/576p
signals can be converted to 1080i, 720p or 1080p
signals.
• 720p signals can be converted to 1080i or
1080p.
• 1080i signals can be converted to 1080p.
• The output resolution can be set for HDMI OUT 1
and HDMI OUT 2. (SR6004 only)
Notes
• Do not set to 1080i, 720p or 1080p when
connected to a monitor that does not support
1080i, 720p or 1080p signals. The SETUP MENU
will not be displayed. If the SETUP MENU is not
displayed, change settings while viewing the main
unit display panel.
• The resolution of analog component output
cannot be changed.
• HDMI OUT 1 and HDMI OUT 2 cannot be output
simultaneously. (SR6004 only)