Marantz SR5004 - Manual (Page 5)

NAMES AND FUNCTIONS
3
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
ENGLISH
BEFORE USE
EQUIPMENT MAINS WORKING
SETTING
Your Marantz product has been prepared to comply
with the household power and safety requirements
that exist in your area.
This unit can be powered by 120V AC only.
DO NOT LOCATE IN THE
FOLLOWING PLACES
To ensure long-lasting use, do not locate the unit
where:
• Exposed to direct sunlight.
• Near to sources of heat such as heaters.
• Highly humid or poorly ventilated.
• Dusty.
• Subjected to mechanical vibrations.
• On wobbly, inclined or otherwise unstable
surfaces
• Near windows where there is a chance of
exposure to rain, etc.
• On top of an amplifi er or other component which
dissipates a great deal of heat
To ensure proper heat radiation, ensure the below
clearance from walls and other equipment.
Left 0.2 m (8 in)
or more Right 0.2 m
(8 in) or more
Above 0.2 m
(8 in) or more
Rear 0.2 m (8 in) or more
KEEP OBJECTS OFF
Keep objects off the unit. Blocking the vent can
result in accident and damage.
DO NOT TOUCH HOT AREAS,
ESPECIALLY AROUND THE “HOT
SURFACE MARK” DURING AND
IMMEDIATELY AFTER USE
During and immediately after use, this product is
hot in areas other than the controls and rear panel
connection jacks. Do not touch hot areas, especially
around the “hot surface mark” and the top panel.
Contact with hot areas can cause burns.
OPENING AND CLOSING THE FRONT
PANEL DOOR (SR6004 ONLY)
When you want to use the controls behind the front
panel door, open the door by gently pressing on the
lower part of the panel. Keep the door closed when
not using these controls.
Caution
• Be careful not to pinch your fi ngers between the
door and the panel.
USAGE OF REMOTE CONTROLLER
LOADING BATTERIES
Before using the remote controller for the fi rst time,
load the batteries in the remote controller. The
batteries provided are used to verify the operations
of the remote controller only.
1. Remove the battery cover.
2.
Paying close attention to polarity indicators
( ª plus and · minus), be sure to insert
batteries correctly and as indicated.
3. Return the battery cover to its original
position.
3
2 1
CAUTIONS ON HANDLING BATTERIES
Misusing batteries can lead to fi re, injury or soiling
of surrounding area as a result of leakage, rupture
or corrosion.
Carefully read the following precautions before
using batteries.
• Insert the batteries while ensuring that their
ª and · poles are properly aligned with
the corresponding markings on the remote
controller.
• Batteries of the same size and shape may have
different voltages. Do not use any battery except
the type indicated. Do not use old and new
batteries together, and do not use different types
of batteries together.
• Do not recharge batteries.
• Keep batteries out of the reach of children. Seek
medical attention if accidentally ingested.
• Do not carry or store batteries together with
metal ball point pens, necklaces, coins, hair pins,
etc.
• If you will not be using the remote controller for
an extended time (1 month or more), remove the
batteries to prevent leakage. If batteries leak, do
not touch the fl uid with bare hands. Wipe away
any fl uid in the case and put in new batteries.
When doing so, handle with care, because fl uid
on skin or clothing presents a burn risk. If you
accidentally get fl uid on your skin, immediately
wash with water and seek medical attention.
• Do not heat or take apart batteries or put them in
fl ame or water.
• When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction’s rules that
apply in your country or area.
• Do not expose the batteries to excessive heat
such as direct sunlight, fi re or the like.
Hot surface mark