NewTek 3Play 330 - Manual (Page 30)

Page 24
7. Click the Change button, and enter the name of your local workgroup, as provided by your
system administrator.
8. Close the OK button.
9. Close the System control panel.
At this point, the network connection should be functional. If further help connecting is required,
please consult your local system administrator.
The next section (Chapter 5 - Quick Start) will walk you through your first 3P LAY session. To keep
this initial ‘orientation run’ simpler, you may wish to employ 1-Out mode and connect a single
monitor (of a suitable video standard and resolution for your video sources) to any of 3P
LAY ’s
output connections.