NewTek 3Play 330 - Manual (Page 43)

Page 37
2. Hold the ALT button down and press MARK IN.
3. If you wish, go ahead and select a new frame for the event to end at in similar fashion,
updating the Duration by pressing ALT + MARK OUT.
5.12 PLAYBACK INFORMATION
Figure 20
A compact information panel appears between the Main Output monitor and the smaller Output
Stream monitors below. This panel provides information about the video stream(s) currently going
to Output. Three important items are displayed: Current Time, Currently Displaying, and Time
Remaining.
The Current Time counter shows the time of the currently displayed video frame. Note that this
time reference is not ‘real world time’ (i.e., the time your watch shows). Rather, it is based on
Session Time Recorded -- as shown in the Device Information display near the Record button.
The Currently Displaying status field updates to inform you whether the current 3P LAY output is:

Live – Video passed through directly from 3P LAY ’s inputs

Delayed - Video running behind real time, perhaps because you have jogged Live Video or
jumped it backwards, or assigned a slow motion speed and pressed Play

Event – Playback of an entry from the Event List (the event ID# is shown)

Highlight – Playback is in Play Highlight mode (the event ID# is shown)
The Time Remaining display is just to the right of Currently Displaying. During Event playback, this
field contains a countdown showing how much time remains before the end of the currently
playing event.