NewTek 3Play 330 - Manual (Page 92)

Page 86
7.1.6 CONNECT TO A NETWORK?
Please refer to Section 4.4.5.
7.2 SESSIONS
7.2.1 START AN SD SESSION?
1. Connect your SD sources to 3P LAY ’s input connectors (see Section 4.4.1).
2. Connect your SD monitors to 3P LAY ’s output connectors (see Section 4.4.2).
3. Select New Session in the Administration Screen (see Section 5.1 and 6.3.1).
4. 3P LAY International only: choose your local Video Standard (NTSC, NTSC-J or PAL).
5. Choose either SD 4:3 or SD 16:9 (widescreen) for Resolution.
6. Click Open Session.
7. Open I/O Configuration by clicking the little gear icon in the 3P LAY Desktop titlebar, and
configure the video source type for each input (see Section 5.2 and 6.4.2).
7.2.2 START AN HD SESSION?
1. Connect your HD sources to 3P LAY ’s input connectors (see Section 4.4.1).
2. Connect your HD monitors to 3P LAY ’s output connectors (see Section 4.4.2).
3. Select New Session in the Administration Panel (see Section 5.1 and 6.3.1).
4. 3P LAY International only: choose your local Video Standard (NTSC, NTSC-J or PAL).
5. Select either HD 720P or HD 1080i for Resolution.