Orion System HB Controller - Manual (Page 43)

Index
43 HB Controller Technical Guide
Cooling Relay #1.......17, 23
for Dehumidify.......23
Cooling Relay #1 Force.......26
for Force Mode.......26
Cooling Relay #2.......17, 24
for Dehumidify.......24
Cooling Relay #2 Force.......26
for Force Mode.......26
Cooling Setback.......30
HB Processor Setpoint.......30
Cooling Setpoint.......28, 29
HB Processor Board.......28
HB Processor Setpoint.......29
Cooling Stage 1 Energized.......17
Cooling Stage 2 Energized.......17
Cooling Stage Down Delay.......18
Cooling Stage-Up Delay.......18
Cooling Stages Quantity.......18
D
Damper Reset Setpoints
Minimum.......37
Date and Time
HB Processor Board.......28
Day.......31
HB Processor Week Real Time Clock.......31
Day of Week.......30, 31
HB Processor Week Real Time Clock.......31
HB Processor Week Schedule.......30
Dehumidifi cation Mode (No Reheat).......5
Dehumidifi cation Mode with Hot-Gas Reheat.......5
Dehumidify Module Status Screens.......23
Condenser Fan Relay.......24
Cooling Relay #1.......23
Cooling Relay #2.......24
Economizer Current Position.......24
Fan Signal.......23
Fan Status.......23
Liquid Line Temperature.......24
OAT Temperature.......24
RAB Position.......23
RH Terminal Active.......23
Supply Air Temperature.......24
Device Address Screen.......28, 32
E
Economizer Change Over Switch.......22
Economizer Confi guration.......22
Economizer Control Setpoints.......37
Economizer Cooling.......4
Economizer Current Position.......21, 24
for Dehumidify.......24
for Economizer.......21
Economizer Dehumidifi cation.......4
Economizer Force.......26
for Force Mode.......26
Economizer IAQ Control.......4
Economizer Module Setpoint Screens.......22
CO
2
Level Economizer Opens Above Minimum.......23
CO
2
Level Economizer Opens to Economizer
Maximum.......23
CO
2
Maximum Position with High Speed Fan.......23
CO
2
Maximum Position with Low Speed Fan.......22
CO
2
Minimum Position with High Speed Fan.......22
CO
2
Minimum Position with Low Speed Fan.......22
Economizer Confi guration.......22
Exhaust Fan On with High Speed Fan.......23
Exhaust Fan On with Low Speed Fan.......23
OAT Changeover to Mechanical Cooling.......22
Outdoor Air Temperature Enable.......22
Economizer Module Status Screens.......21
Carbon Dioxide Level.......22
Economizer Change Over Switch.......22
Economizer Current Position.......21
Exhaust Fan Relay.......22
Fan Signal.......22
Fan Status.......21
Outdoor Air Temperature.......21
Supply Air Temperature.......21
Economizer Operation with ECS Control.......4
Entering Passcodes.......14
Enthalpy Changeover Switch......4
Exhaust Fan Control.......6
Exhaust Fan Control Setpoints.......37
Exhaust Fan On with High Speed Fan.......23, 27
for Economizer.......23
Force Mode Setpoint.......27
Exhaust Fan On with Low Speed Fan.......23, 27
for Economizer.......23
Force Mode Setpoint.......27
Exhaust Fan Relay.......22
for Economizer.......22
Exhaust Fan Relay Force.......26
for Force Mode.......26
F
Factory Options Module Screens.......27
Force Defaults.......27
Force No Limit.......27
Force Time Limit.......27
Fan Cycle Confi g.......30
HB Processor Setpoint.......30
Fan Mode.......4
Fan Module Setpoint Screens.......16
Adjustable Two-Speed Supply Fan High Speed Signal.......17
Adjustable Two-Speed Supply Fan Low Speed Signal.......17
Supply Fan Confi guration.......16
Fan Module Status Screens.......16
Fan Status.......16
Fan Terminal Active.......16
Supply Fan Analog Output Signal.......16
C-F