REMKO WPM-Smart-Control-Manual for specialists-WKF-085 - Manual (Page 22)

"Settings" menu item (continued) - User
Authorisa-
tion level
Level 2 menu
item
Level 3 menu item Level 4 menu item Info
Heating /
cooling
Mode
Room climate mode
You can find
many of the indi-
vidual info texts
about the level
2-4 menu items
on your Smart-
Control
Difference from cooling
limit
Difference from heating
limit
Cooling
Time programme
Cooling curve adjustment
Building adaptation Inertia of the heating curve
Heater
heating cycle
Time programme A
Time programme B
Time programme C
Room temperature reduc-
tion
Heating curve adjustment
Floor
heating cycle
Time programme A
Time programme B
Time programme C
Room temperature reduc-
tion
Heating curve adjustment
Heat pump
Basic settings Output restriction
Graduated tariff
Number of power tariffs
Time field Tariff 1
Time field Tariff 2
Power tariff 1
Power tariff 2
PV power utilisation
Power tariff 1
Feed-in tariff
Personal use tariff
"Messages" menu item
Pressing "OK" (right softkey) takes you to sub-
menus of the menu item "Messages".
This is where operating messages, warning
notices and fault messages are displayed.
Explanation of symbols:
Warning message
Fault message
If one of these symbols appears in the header of
the control screen, please access the menu item
"Messages" and display the details, with instruc-
tions on how to rectify the fault, with the key on the
right.
Operating messages indicate which of the regular
operating statuses the system is in.
REMKO Smart WP MANAGER
22