REMKO WPM-Smart-Control-Manual for specialists-WKF-085 - Manual (Page 25)

Menu item Parameter
Factory
setting
Nederlands
Polski
Press "Next".
Setting the time zone for the winter time
Selecting the time zone for the winter time allows
the switch to daylight savings time to occur auto-
matically. The respective time zone in winter must
be specified.
Central Europe (GER, FR, IT, ES, PL)
-CET (Central European Time, Berlin, Paris)
If UTC (Universal Time Coordinated) is selected,
no automatic switch to daylight savings time
occurs.
Select the time zone with the rotary knob and con-
firm the entry with "OK".
Fig. 33: Setting the time zone
Menu item Parameter Factory setting
Time zone
(winter)
Time zones
from "Winter
-12" to "Winter
+12 (PETT)"
can be set
Winter +1
(CET)
Press "Next".
Setting the date
When setting the date, first the four-digit year is
selected, then the month, and finally the day. The
appropriate value is selected in each case by
turning the rotary knob, and then confirmed with
"OK".
Fig. 34: Setting the date
Menu item Parameter Factory setting
Date setting
Year
Current date
entry
Month
Day
Press "Next".
Setting the time
From here, you can set the current time. The con-
troller has automatic daylight savings switching,
which can also be activated from the menu "Lan-
guage / Time".
When setting the time, first the hours are selected,
and then the minutes. The appropriate value is
selected in each case by turning the rotary knob,
and then confirmed with "OK".
Fig. 35: Setting the time
Menu item Parameter Factory setting
Time setting
Hours
Current time
entry
Minutes
Press "Next".
25