Remotec ZTS-110 V3.14 - Manual (Page 24)

24
⇓
3
Press “Prog＂ key once to
confirm the setting and it will go to
hour setting.
Hour will keep flashing, press
Up/Down key to set hour.
4
Press “Prog＂ key once to
confirm the setting and it will go to
minutes setting.
Minutes will keep flashing, press
Up/Down key to set minutes.
5
Press and hold “UP” and “DOWN”
key for 2 seconds to disable /
enable event during the time
setting.
If the event is disabled, “OFF” will
be displayed.
If the event is enabled, time will be
displayed and Hour will keep
flashing.
⇓