Features list – Remotec ZTS-110 V3.14 User Manual
Page 4
4
Features List
HVAC System Type Compatible:
z
Standard (gas/electric) or Heat Pump
Multistage System Compatible:
z
Standard HVAC Systems: 2 stages heating, 1 stage cooling
z
Heat Pump Systems: 2 stages heating, 1 stage cooling
Heat Pump change over valve:
z
Selectable change over with cool or with heat
Program Style:
z
2 program modes for scheduling (Mo‐Fr, Sa‐Su)
z
4 Separate Time and Temperature Settings for each program
z
Heat and Cool set‐points for each program
z
Temporary Program Override
z
Permanent Program Override
z
Built‐in flash memory stores heat and cool program settings
Temperature Display and Control:
z
Temperature display in °F or °C
z
Temperature Measurable Range: 32 – 99 °F / 0 – 40 °C
z
Temperature Setting Range: 41‐99 °F / 5‐37 °C
z
Adjustable Temperature Control Swing/Differential
a) Swing: 1°F, 2°F, 3°F or 4°F ( 0.5°C, 1.0°C, 1.5°C or 2°C)
b) Differential: 1°F, 2°F, 3°F or 4°F ( 0.5°C, 1.0°C, 1.5°C or 2°C)
z
Advanced Recovery Mode (ARM)
z
Defrost Function
z
Short cycle start up protection
Clock:
z
Time display format: 12/24 hour clock selection with day displayed
Filter Counter:
z
Filter change reminder displayed after 500 hours usage (500‐4000hrs)
Z‐Wave:
z
Support Network Wide Inclusion (NWI) and Explore Frames
z
Support Easy mode (disable local advanced setup and control)
z
Support “Frequently Listening Routing Slaves” (FLiRS) mode and “Always Listening”
mode
z
Support battery level report
z
Support Association Groups
a) Association Group_1 is used for Heat Pump control
b) Association Group_2 is used for Compressor control
c) Association Group_3 is used to report status change such as AUTO report to
gateway
Power:
z
Support AA x 4 alkaline batteries or 24Vac input