Remotec ZTS-110 V3.14 - Manual (Page 34)

34
Case 2 3 1 1 (AUTO report)
Case 3 2 2 1 (AUTO report)
Case 4 1 3 1 (AUTO report)
Case 5 0 4 1 (AUTO report)
Important:
Please do not associate heat pump and compressor devices in same association group because heat
pump and compressor device cannot be turned on simultaneously!
Association groups setting example (case 3):
F‐BW8031 (ZTS‐110)
F‐BW8041 (ZFM‐80)
(Node ID‐A)
F‐BW8041 (ZFM‐80)
(Node ID‐B)
Z‐Wave Gateway
(Node ID‐E)
Association group_1
for Heat Pump
Association group_2
for Compressor
Association group_3
for Auto report to gateway
F‐BW8041 (ZFM‐80)
(Node ID‐C)
F‐BW8041 (ZFM‐80)
(Node ID‐D)