Remotec ZTS-110 V3.14 - Manual (Page 39)

39
2
Press “Prog＂ key once to
confirm the action.
=> It will perform the reset if select
“Yes＂ or
=> It will back to home page if
select “No＂.
LCD display done after reset to
factory default settings.
(The following data will be reset to
default:
1. Clock : 12:00am
2. Day: Mon
3. Temperature scale: F
4. Swing : 2F
5. Diff: 2F
6. Pre‐defined schedule
7. Operation mode: OFF
8. Default Heat override set point
9. Default Cool override set point
10. Filter counter cleared
11. Delete from network
12. All configuration parameters
value.
Frequently Asked Questions
Q Why won’t my ZTS‐110 work with the Z‐Wave devices I purchased from another country?
A Due to different countries regulations Z‐Wave products from different regions are set to
different frequencies. Before purchasing new devices make sure you have checked to see that
the device is compatible in your region.
Q Do I need an electrician to install ZTS‐110 in my house?
A We recommend that you acquire the services of a qualified technician to install this product.
Q How do I know which product is compatible to my ZTS‐110?
A ZTS‐110 should work with any Z‐Wave controller or gateway that has control capability for
“Thermostat” devices. All Z‐Wave products also come with the Z‐Wave logo.