Remotec ZTS-110 V3.14 - Manual (Page 25)

25
6
Press “Prog＂ key once to
confirm the setting and it will go to
target setting.
If the event is enabled, it will go to
target setting.
Target will keep flashing, press
Up/Down key to adjust Heat set
point for heating.
If the event is disabled, it will go to
next event setting.
7
Press “Prog＂ key once to
confirm the setting and it will go to
target setting.
Target will keep flashing, press
Up/Down key to adjust Cool set
point for cooling.
8
Press “Prog＂ key once to
confirm the setting and it will go to
next event mode.
Follow the program UI to complete
the whole scheduling or press
Home key once to save and exit.
‐
Battery Low Indication
Step Procedure / Description LCD indication
1
ZTS‐110 thermostat will detect the
battery level every 30 minutes;
Battery low icon will be displayed
at Home page if the battery is
running out.
(User is required to change new
batteries.)