Print recovery after a jam, Rint, Ecovery – Rena Envelope Imager 3.0 User Manual
Page 26: Fter a
SECTION 3
OPERATING THE PRINTER
Print Recovery After a Jam
If the media should jam in the printer during the run it is possible to recover up to 9 pieces (records) that
might be lost. If a jam occurs, the printer control panel will display “Jam: Reprint Lost Pieces” and
“MENU To Continue”..
To recover the lost pieces do the following:
1. Press the MENU key and the “Address Recovery” option will appear.
2. Press the ENTER key and the following display will appear “Enter: Recover 1 piece”.
3. Use the + key to select the number of pieces you wish to recover up to 9.
NOTE: Count the number of pieces you wish to recover and then add 2 for the pieces (records) that
are in the buffer.
4. Next, press the ENTER key again to register the number of pieces to be recovered.
5. Then press the ENTER key again to restart the printer.
6. You may repeat this process a many times as required. When you reach the end of the database if
the last piece jams, then enter 1 piece to be recovered.
26
Envelope Imager 3.0/4.0 Operations Rev. 6/7/2007