Teac DP-006 - Manual (Page 27)

TASCAM DP-006
27
2 – Quick Start Guides
9. Press the F4 [EXEC] button.
After a Master Rec! pop-up message appears, the unit enters master
recording mode and the Home Screen reopens.
NOTE
When in master recording mode, MASTER REC appears highlighted at
the top left of the Home Screen.
10. Press the Play (7) button while pressing and holding the Record (0)
button to start recording the stereo master track from the IN point.
Recording automatically stops when the OUT point is reached.
NOTE
•
Set the IN and OUT points at least four seconds apart. If they are less than
four seconds apart, a Trk Too Short pop-up message will appear
and you will not be able to change the unit to master recording mode.
•
You can use the LEVEL knobs to adjust the track and overall levels as you
record the master track.
Checking the stereo master track
You can play back the stereo master track that you created to check it.
1. When the recorder is stopped, press the REC MODE button to open the
RECORDER MODE screen.
2. Use the DATA wheel to select (highlight) MASTER PLAY.