Teac DP-006 - Manual (Page 51)

TASCAM DP-006
51
6 – Basic Recording
Selecting the input source
This unit has two inputs (INPUT A/B) that can be selected separately as input
sources.
The built-in microphones (front panel MIC A/B) and external input signals
(input through the rear panel INPUT A/B jacks) can be selected as input
sources.
Mic, line and guitar signals can be input through the INPUT A standard jack.
Set the MIC/LINE-GUITAR switch on the left side of the unit to GUITAR.
1. When the recorder is stopped, press the INPUT SETTING button to open
the INPUT SETTING screen.
Use the IN A and IN B items to set the input sources for INPUT A and
INPUT B.
2. Use the F3 [5] and F4 [b] buttons to select (highlight) the IN A or IN
B setting value, and use the DATA wheel to set the input source.
IN A options
Option Description
OFF Input off
INT.MIC A-Low
(default value)
Built-in mic A (low input gain)
INT.MIC A-Mid Built-in mic A (medium input gain)
INT.MIC A-High Built-in mic A (high input gain)
GUITAR/LINE
Guitar or line through INPUT A jack
(low input gain)
GUITAR/LINE M
Guitar or line through INPUT A jack
(medium input gain)
GUITAR/LINE H
Guitar or line through INPUT A jack
(high input gain)
MIC Mic through INPUT A jack
IN B options
Option Description
OFF Input off
INT.MIC B-Low
(default value)
Built-in mic B (low input gain)
INT.MIC B-Mid Built-in mic B (medium input gain)
INT.MIC B-High Built-in mic B (high input gain)
LINE Line through INPUT B jack (low input gain)
LINE Mid
Line through INPUT B jack (medium input
gain)
LINE High Line through INPUT B jack (high input gain)
MIC Mic through INPUT B jack
3. After making the setting, press the HOME button to return to the Home
Screen.