Teac DP-006 - Manual (Page 44)

44
TASCAM DP-006
4 – Preparations
Right side panel connections
DC plug
AC wall socket
TASCAM
PS-P520
(sold separately)
USB
Computer
Mini-B USB plug
NOTE
•
Recorder functions cannot be used when connected to a computer by USB.
•
This unit can only be connected to a computer by USB when the recorder
mode is set to MULTI TRACK.
Adjusting the contrast
You can adjust the contrast of the display.
Follow these steps to adjust the contrast.
1. When the recorder is stopped, press the MENU button to open the
MENU screen.
2. Use the DATA wheel to select (highlight) the PREFERENCE item, and
press the F4 [t] button to open the PREFERENCE screen.
3. Use the F3 [5] and F4 [b] buttons to select the Contrast item, and
use the DATA wheel to to adjust the display contrast.
The setting values are 1–10 (default value: 5).
Lower values make the display lighter while higher values make it darker.
The display appears different depending on the angle from which you
view it, so adjust it while the unit is in the actual position that you plan to
use it in. Adjusting the contrast might make it easier to read.
4. After completing the setting, press the HOME button to return to the
Home Screen.