Teac DP-006 - Manual (Page 48)

48
TASCAM DP-006
5 – Song Management
Viewing song information
You can check the name (title), MTR partition and remaining recording time
of the currently loaded song on the SONG (1/4) page of the INFORMATION
screen. (See “Viewing information” on page 78.)
1. When the recorder is stopped, press the MENU button to open the
MENU screen.
2. Use the DATA wheel to select (highlight) the INFORMATION item, and
press the F4 [t] button.
This opens the SONG (1/4) page of the INFORMATION screen, which
shows the name and remaining recording time of the current song.
NOTE
The INFORMATION screen has four pages, including SONG (1/4), CARD
(2/4), SYSTEM (3/4) and F/W (4/4). Use the F3 [PREV] and F4 [NEXT]
buttons to change the page. (See “Viewing information” on page 78.)
Copying songs
Songs in the currently active partition can be copied to the same and different
MTR partitions. Multiple songs can also be copied at once.
1. When the recorder is stopped, press the MENU button to open the
MENU screen.
2. Use the DATA wheel to select (highlight) the SONG item, and press the
F4 [t] button to open the SONG menu screen.
3. Use the DATA wheel to select (highlight) the COPY item, and press the
F4 [t] button to open the SONG COPY screen.
A list of songs on the active partition is shown.
4. Use the DATA wheel to select (highlight) the song you want copy, and
press the F4 [✔] button.
The song is selected as a copy source and a check appears in the
checkbox.