Verilink PRISM 3000 (34-00184) Product Manual User Manual

Page 8

Advertising
background image

PRISM 3000

1-4

General

compliance could void the user’s authority to operate the
equipment.

This device complies with Part 15 of the FCC rules. Opera-
tion is subject to the following two conditions:

1)

This device may not cause harmful interference.

2)

This device must accept any interference received,

including interference that may cause undesired operation.

Notice to Users of 1.544 Mb/s Service: The following
instructions are provided to ensure compliance with FCC
Rules, Part 68:

1)

All direct connections to T1 lines must be made using

standard plugs and jacks.

2)

The following information may be required by the local

telephone company when applying for leased line facilities:

Port ID: P/N: FSG 3XX2/4

SOC (Service Order Code): 6.0 N

FIC (digital Facility Interface Code):
04DU9 -BN

04DU9-DN

04DU9 -IKN

04DU9-ISN

USOC jack:

RJ48C

3)

If the unit appears to be malfunctioning, it should be

disconnected from the telephone lines until you learn
whether the source of trouble is your equipment or the tele-
phone line. If your equipment needs repair, it should not be
reconnected until it is repaired.

4)

The unit has been designed to prevent harm to the T1

network. If the telephone company finds that the equipment
is exceeding tolerable parameters, they can temporarily dis-
connect service. In this case, the telephone company will
give you advance notice, if possible.

5)

Under FCC rules, no customer is authorized to repair

this equipment. This restriction applies regardless of
whether the equipment is in or out of warranty.

6)

If the telephone company alters their equipment in a

manner that will affect the use of this device, they must give
you advance warning so that you can have the opportunity
for uninterrupted service. You will be advised of your right
to file a complaint with the FCC.

7)

The attached affidavit must be completed by the

installer.

8)

In the event of equipment malfunction, all repairs

should be performed by our company or an authorized
agent. It is the responsibility of users requiring service to
report the need for service to our company or to one of our
authorized agents.

1.4

Canadian Emissions Requirements

This digital apparatus does not exceed the Class A limits for
radio noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian Department
of Communications.

NOTE: End users should use existing 48 VDC battery
sources or a CSA certified power supply.

Le present appareil numerique n’emet pas de bruits
radioelectriques depassant les limites applicables aux
appareils numeriques (de la class A) prescrites dans le
Reglement sur le brouillage radioelectrique edicte par le
ministere des Communications du Canada.

1.5

Warranty

TxPORT warrants each unit against defects in material and
workmanship for a period of five years from the date the
unit was shipped to the customer. If the unit malfunctions at
any time during the warranty period, TxPORT will repair, or
at TxPORT’s option, replace the unit free of charge.

The remedies listed herein are the users sole and exclusive
remedies. TxPORT shall not be liable for any indirect,
direct, incidental or consequential damages. The owner must
return the unit to the factory, shipping prepaid and packaged
to the best commercial standard for electronic equipment.
TxPORT will pay shipping charges for delivery on return.
The customer is responsible for mode and cost of shipment
to TxPORT.

This warranty does not apply if the unit has been damaged
by accident, misuse or as a result of service or modification
by other than TxPORT personnel.

When returning the unit for warranty work, a Return Mate-
rial Authorization (RMA) number must be obtained from
customer service at the address/ phone number given at the
end of this chapter. When calling TxPORT to obtain a
Return Material Authorization number or to arrange service,
please have the following information available:

• Model number(s) and serial number(s) for the unit(s).

• Reason for return and symptoms of problem.

• Warranty status (if known).

• Purchase order number to cover charges for out-of-war-

ranty items.

• Name and phone number of person we can contact if we

have questions about the unit(s).

Advertising