Specifications -2, Network interface -2, Equipment interface -2 – Verilink PRISM 3101 (34-00212) Product Manual User Manual

Page 6: Management interfaces -2, Diagnostics -2, Alarms -2, Mechanical -2, Environmental -2, Standards -2, Specifications

Advertising
background image

General 1-2

PRISM 3101/3102

• D4 or ESF line framing, AMI or B8ZS line coding

• Supports Fractional T1 services with flexible bandwidth allo-

cation

• S

LIP

RS-232 standard SNMP interface

• Ethernet or Token Ring NIC for integral LAN (optional)

Specifications

Network Interface

Line Rate:

1.544 Mbps (

±

50 ppm)

Line Framing:

D4 or ESF

Line Code:

AMI or B8ZS

Input Signal:

0 to -27 dB ALBO

Connection:

RJ-48C jack, 100

(

±

5%)

Output Signal:

3.0 V (

±

10%) base-peak into 100

with protection

Line Build Out:

0, -7.5, -15, -22.5 dB attenuation

Transient Voltage: 1000 V protection, fused input/output

Jitter Control:

per TR62411 and T1.403

Timing Source:

Internal, recovered line clock,
external DTE

Ones Density:

B8ZS, Nx56 bit stuffing, alternate
fill; complies with TR62411

Equipment Interface

DTE Ports:

3101 single port and 3102 dual port

Compatibility:

EIA530 (RS-422), female DB-25
CCITT V.35, female 34-pin

Data Rate:

Synchronous, Nx56 kbps or
Nx64 kbps (where N = 1 to 24);
independent selection on each port

Clocking:

Internal, External, Oversample

Data Invert:

Independent selection on each port

Management Interfaces

Supervisory Port

Connection:

8-pin modular (RS-232)

Data Rates:

1.2, 2.4, 9.6, and 19.2 kbps

SLIP Port

Connection:

8-pin modular (RS-232)

Data Rates:

1.2, 2.4, 9.6, and 19.2 kbps

SNMP / TELNET Ethernet (optional)

Connection:

8-pin modular

Network Protocol: TCP/IP based networks

Data Rate:

10 Mbps

Compatibility:

10BASE-T

SNMP / TELNET Token Ring (optional)

Connection:

8 -pin modular

Network Protocol: TCP/IP based networks

Data Rate:

4 or 16 Mbps

Compatibility:

Type 3 unshielded twisted pair (UTP)

Diagnostics

Performance:

Monitoring per TR54016 and T1.403

Network Loops:

Line loopback, payload loopback, or
maintenance loopback in the network
direction

Fractional Loop:

Responds to inband V.54 loop code

DTE Port Loops:

Bidirectional loop toward DTE and Net

T1 DTE Loops:

Line loop toward DTE

Maintenance loop toward DTE

BERT:

Multiple test patterns toward network or
DTE ports

Alarms

Activation:

Programmable thresholds

Reporting:

Front panel LEDs, call out on alarm
(COA), SNMP TRAPs

Power

AC:

117 VAC, 0.12 A, 12 W maximum, 41
BTU maximum

DC:

24 VDC, 0.50 A, 12 W maximum, 41
BTU maximum

48 VDC, 0.25 A, 12 W maximum, 41
BTU maximum

Mechanical

Mounting:

Desktop or horizontal rack

Dimensions:

Width 12 inches (30.48 cm)

Height 1.75 inches (53.34 cm)

Depth 9 inches (22.86 cm)

Weight:

4 pounds (1.814 kg)

Environmental

Operating Temp:

32

°

to 122

°

F (0

°

to 50

°

C)

Storage Temp:

-4

°

to 185

°

F (-20

°

to 85

°

C)

Humidity:

95% maximum (non-condensing)

Standards

TR 62411:

December 1990

TR 54016:

September 1989

ANSI T1.403:

1989

TR 54019A:

April 1988

Ethernet:

ISO/IEC 8802-3

Token Ring:

ISO/IEC 8802-5

Advertising
This manual is related to the following products: