H3C Technologies H3C MSR 50 - Manual (Page 705)

320
Item Description
Account Status
• Enable.
• Disable.
By default, the SIP trunk account is enabled.
Disabling a SIP trunk account that is already involved in a connection does not delete the
connection. In other words, the disable configuration takes effect to the next call that uses
this account.
Registration
Function
• Enable.
• Disable.
By default, the registration function of the SIP trunk account is disabled.
To perform registration, you must provide the host username or associate the account with
a SIP server group.
Authentication
Username
Enter the authentication username for the SIP trunk account.
Authentication
Password
Enter the authentication password for the SIP trunk account.
Configuring registration parameters for a SIP trunk account
Select Voice Management > Call Connection > SIP Connection from the navigation tree and click the
Advanced Settings tab to configure registration parameters for a SIP trunk account. For more information
about registration parameter configuration, see "Configuring SIP connection."
Configuring a call route for outbound calls
This section describes how to configure a call route for outbound calls.
Configuring a call route for a SIP trunk account
To use a SIP trunk account to call an external user, you must first bind the SIP trunk account to a call route,
and then configure call routes in one of the following methods:
• Bind a SIP server group to the VoIP voice entity.
• Specify the IP routing.
• Specify the proxy server used for outbound calls.
To configure a call route for a SIP trunk account:
Select Voice Management > SIP Trunk Management > Call Route from the navigation tree, and click
Add.