Verifying the configuration, Configuring call authority control, Network requirements – H3C Technologies H3C MSR 50 User Manual

Page 778: Configuring the local sip server on router c

Advertising
background image

393

Verifying the configuration

•

When the VCX fails, the local SIP server on Router A starts to accept registrations from phones,

which then can call each other through Router A. Select Voice Management > States and Statistics >
Local Survival Service States from the navigation tree. You can find that numbers 1000 and 5000

have been registered with the local SIP server on Router A.

•

When the VCX recovers, Router A disables the local SIP server, and the phones register with the
VCX again.

Configuring call authority control

Network requirements

The numbers for Department A in a company are in the range of 1000 to 1999, while those for

Department B are in the range of 5000 to 5999. The following restrictions need to be implemented:

•

Phones in Department A and Department B cannot originate external calls.

•

Phone 5000 is not allowed to call phone 1000.

Figure 780 Network diagram

Configuring the local SIP server on Router C

# Configure the local SIP server to operate in alone mode.

1.

Select Voice Management > SIP Local Survival > Service Configuration from the navigation tree to
access the following page.

Advertising
This manual is related to the following products: