H3C Technologies H3C MSR 50 User Manual
Page 91
70
Figure 44 Configuring port security for the other four security modes (mac-else-userlogin-secure is
taken for example)
Table 45 Configuration items
Item Description
Port Mode
•
mac-else-userlogin-secure—This mode is the combination of the
mac-authentication and userlogin-secure modes, with MAC authentication
having a higher priority. Upon receiving a non-802.1X frame, a port in this mode
performs only MAC authentication. Upon receiving an 802.1X frame, the port
performs MAC authentication and then, if MAC authentication fails, 802.1X
authentication.
•
mac-else-userlogin-secure-ext—This mode is similar to the
mac-else-userlogin-secure mode, except that it supports multiple 802.1X and
MAC authentication users on the port.
•
userlogin-secure-or-mac—This mode is the combination of the userlogin-secure
and mac-authentication modes, with 802.1X authentication having a higher
priority. For a wireless user, 802.1X authentication is performed first. If 802.1X
authentication fails, MAC authentication is performed.
•
userlogin-secure-or-mac-ext—This mode is similar to the
userlogin-secure-or-mac mode, except that it supports multiple 802.1X and MAC
authentication users on the port.
Max User
Control the maximum number of users allowed to access the network through the
port.
Mandatory Domain
Select an existing domain from the list. After a mandatory domain is configured, all
802.1X users accessing the port are forced to use the mandatory domain for
authentication, authorization, and accounting.
The default domain is system. To create a domain, select Authentication > AAA from
the navigation tree, click the Domain Setup tab, and type a new domain name in the
Domain Name field.