Grass Valley PFR 500/E Dec 10 2001 - Manual (Page 31)

Attaching the mounting rails
November 17, 2000 PFC 500/E Instruction Manual 31
Attaching the mounting rails
Once you have determined the positions for the mounting rails, you can attach them to
the cabinet. Each rail has threaded nuts on its front flange. You can install any rail in a
U-aligned or U-nonaligned position.
1. For each device, attach the rails to the front channels as follows.
A. Align the base of the left rail with the
baseline and use two screws to
attach the front of the left rail loosely
to the cabinet’s front channel.
Baseline
B. Align the base of the right rail with
the baseline and use two screws to
attach the front of the right rail
loosely to the cabinet’s front channel.
DPE rails
Baseline