Grass Valley PFR 500/E Dec 10 2001 - Manual (Page 49)

Replacing or adding a disk module
November 17, 2000 PFC 500/E Instruction Manual 49
To install a disk or filler module
1. Gently insert the disk module as follows:
The disk module’s Active light flashes to reflect the disk’s spin-up sequence. (No
lights flash with a filler module.)
2. Remove and store the ESD wristband and continue to the next section to close the
front door.
Latch
A. Grasp the disk or filler module’s
handle.
B. Align the module with the guides in
the slot.
C. Gently push the module into the
slot until the latch engages.