HEIDENHAIN TNC 360 User Manual - Manual (Page 13)

TNC 360
6 Subprograms and Program Section Repeats
6.1 Subprograms ............................................................................................ 6-2
Principle ......................................................................................................................... 6-2
Operating limits .............................................................................................................. 6-2
Programming and calling subprograms .......................................................................... 6-3
6.2 Program Section Repeats ........................................................................ 6-5
Principle ......................................................................................................................... 6-5
Programming notes ........................................................................................................ 6-5
Programming and calling a program section repeat ....................................................... 6-5
6.3 Main Program as Subprogram ................................................................ 6-8
Principle ......................................................................................................................... 6-8
Operating limits .............................................................................................................. 6-8
Calling a main program as a subprogram ....................................................................... 6-8
6.4 Nesting ...................................................................................................... 6-9
Nesting depth ................................................................................................................. 6-9
Subprogram in a subprogram ......................................................................................... 6-9
Repeating program section repeats ............................................................................... 6-11
Repeating subprograms ................................................................................................. 6-12