HEIDENHAIN TNC 360 User Manual - Manual (Page 220)

TNC 360 12-10
12 Tables, Overviews, Diagrams
Setting the TNC for handwheel operation
Entry range: 0 to 5
MP 7640
Function Value
• No handwheel .................................................................................................................................................. 0
• HR 330 with additional keys – the keys for traverse direction
and rapid traverse are evaluated by the NC ..................................................................................................... 1
• HR 130 without additional keys ....................................................................................................................... 2
• HR 330 with additional keys – the keys for traverse direction
and rapid traverse are evaluated by the PLC ................................................................................................... 3
• HR 332 with 12 additional keys ....................................................................................................................... 4
• Multi-axis handwheel with additional keys ...................................................................................................... 5