HEIDENHAIN TNC 360 User Manual - Manual (Page 82)

4-17 TNC 360
4 Programming
4.5 Entering Tool-Related Data
TOOL
CALL
NO
ENT
NO
ENT
Spindle speed S
Enter the spindle speed S in revolutions per minute (rpm) in the TOOL
CALL block.
Input range:
S = 0 to 99 999 rpm
To change the spindle speed S in the part program:
Press the TOOL CALL key.
TOOL NUMBER?
Ignore the prompt for the tool number.
WORKING SPINDLE AXIS X / Y / Z?
Ignore the prompt for the tool axis.
SPINDLE SPEED S?
Enter the spindle speed S, for example 1000 rpm.
Resulting NC block: TOOL CALL S1000
To change the spindle speed S during program run:
You can vary the spindle speed S on machines with stepless
ballscrew drives by turning the spindle speed override knob on the
TNC keyboard.
0
100
150 50
S %
0 e.g. 0 0 1
ENT