HEIDENHAIN TNC 128 (77184x-01) - Manual (Page 206)

206 Programming: Q parameters
8.8 A
d
ditional functions
+64: U axis mirrored
+128: V axis mirrored
+256: W axis mirrored
Combinations = Sum of individual axes
4 1 Active scaling factor in X axis
4 2 Active scaling factor in Y axis
4 3 Active scaling factor in Z axis
4 7 Active scaling factor in U axis
4 8 Active scaling factor in V axis
4 9 Active scaling factor in W axis
5 1 3-D ROT A axis
5 2 3-D ROT B axis
5 3 3-D ROT C axis
6 - Tilted working plane active / inactive (–1/0) in a
Program Run operating mode
7 - Tilted working plane active / inactive (–1/0) in a
Manual operating mode
Active datum shift, 220 2 1 X axis
2 Y axis
3 Z axis
4 A axis
5 B axis
6 C axis
7 U axis
8 V axis
9 W axis
Traverse range, 230 2 1 to 9 Negative software limit switch in axes 1 to 9
3 1 to 9 Positive software limit switch in axes 1 to 9
5 - Software limit switch on or off:
0 = On, 1 = Off
Group name, ID no. Number Index Meaning