HEIDENHAIN TNC 128 (77184x-01) - Manual (Page 435)

HEIDENHAIN TNC 128 435
1
7.3 RECT
ANGULAR S
T
UD (Cy
c
le
256)
 Feed rate for finishing Q385: Traversing speed of
the tool during side and floor finishing in mm/min.
Input range 0 to 99999.9999; alternatively FAUTO, FU,
FZ
 Workpiece blank side length 2 Q425: Length of the
stud blank, parallel to the minor axis of the working
plane. Input range 0 to 99999.9999
 Finishing allowance for side Q368 (incremental):
Finishing allowance in the working plane, is left over
after machining. Input range 0 to 99999.9999
 Finishing allowance for floor Q369 (incremental
value): Finishing allowance in the tool axis. Input
range 0 to 99999.9999
 Infeed for finishing Q338 (incremental): Infeed per
cut. Q338=0: Finishing in one infeed. Input range 0 to
99999.9999